Index

A

address (tl_elliptec.bus.Reply attribute) (tl_elliptec.devices.base.DeviceInfo attribute) (tl_elliptec.exceptions.ElliptecStatusError attribute)

as_status_code() (tl_elliptec.bus.Reply method) AutoHomingMixin (class in tl_elliptec.devices.base)

B

backward() (tl_elliptec.devices.base.ElliptecDevice method) backward_frequency_hz (tl_elliptec.devices.base.MotorInfo property) backward_period (tl_elliptec.devices.base.MotorInfo attribute)

backward_pulses() (tl_elliptec.devices.base.ElliptecDevice method) build_message() (in module tl_elliptec.protocol) BUSY (tl_elliptec.status.StatusCode attribute)

C

change_address() (tl_elliptec.devices.base.ElliptecDevice method) clean_mechanics() (tl_elliptec.devices.base.OptimizeCleanMixin method) close() (tl_elliptec.bus.ElliptecBus method) (tl_elliptec.devices.base.ElliptecDevice method) code (tl_elliptec.exceptions.ElliptecStatusError attribute) command (tl_elliptec.bus.Reply attribute)

COMMAND (tl_elliptec.bus.RequestPriority attribute) COMMAND_ERROR_OR_NOT_SUPPORTED (tl_elliptec.status.StatusCode attribute) COMMUNICATION_TIMEOUT (tl_elliptec.status.StatusCode attribute) create_device() (in module tl_elliptec.factory) current_amps (tl_elliptec.devices.base.CurrentCurveSample attribute) (tl_elliptec.devices.base.MotorInfo attribute) CurrentCurveSample (class in tl_elliptec.devices.base)

D

data (tl_elliptec.bus.Reply attribute) decode_char() (in module tl_elliptec.protocol) decode_dword() (in module tl_elliptec.protocol) decode_float() (in module tl_elliptec.protocol) decode_int() (in module tl_elliptec.protocol) decode_le_dword() (in module tl_elliptec.protocol) decode_le_word() (in module tl_elliptec.protocol) decode_long() (in module tl_elliptec.protocol) decode_short() (in module tl_elliptec.protocol) decode_word() (in module tl_elliptec.protocol) DEFAULT_PULSES_PER_UNIT (tl_elliptec.devices.base.ElliptecDevice attribute) (tl_elliptec.devices.models.ELL14 attribute) (tl_elliptec.devices.models.ELL15 attribute) (tl_elliptec.devices.models.ELL16 attribute) (tl_elliptec.devices.models.ELL17 attribute) (tl_elliptec.devices.models.ELL18 attribute) (tl_elliptec.devices.models.ELL20 attribute) (tl_elliptec.devices.models.ELL21 attribute) (tl_elliptec.devices.models.ELL22 attribute)

describe() (in module tl_elliptec.status) DeviceInfo (class in tl_elliptec.devices.base) discover_devices() (in module tl_elliptec.factory)

E

ELL12 (class in tl_elliptec.devices.models) ELL14 (class in tl_elliptec.devices.models) ELL15 (class in tl_elliptec.devices.models) ELL16 (class in tl_elliptec.devices.models) ELL17 (class in tl_elliptec.devices.models) ELL18 (class in tl_elliptec.devices.models) ELL20 (class in tl_elliptec.devices.models) ELL21 (class in tl_elliptec.devices.models) ELL22 (class in tl_elliptec.devices.models) ELL6 (class in tl_elliptec.devices.models) ELL6B (class in tl_elliptec.devices.models) ELL9 (class in tl_elliptec.devices.models) ell_type (tl_elliptec.devices.base.DeviceInfo attribute) ElliptecBus (class in tl_elliptec.bus)

ElliptecDevice (class in tl_elliptec.devices.base) ElliptecError ElliptecProtocolError ElliptecStatusError ElliptecTimeoutError ElliptecUnsupportedError encode_char() (in module tl_elliptec.protocol) encode_dword() (in module tl_elliptec.protocol) encode_float() (in module tl_elliptec.protocol) encode_int() (in module tl_elliptec.protocol) encode_le_word() (in module tl_elliptec.protocol) encode_long() (in module tl_elliptec.protocol) encode_short() (in module tl_elliptec.protocol) encode_word() (in module tl_elliptec.protocol)

F

firmware_release (tl_elliptec.devices.base.DeviceInfo attribute) forward() (tl_elliptec.devices.base.ElliptecDevice method) forward_frequency_hz (tl_elliptec.devices.base.MotorInfo property) forward_period (tl_elliptec.devices.base.MotorInfo attribute)

forward_pulses() (tl_elliptec.devices.base.ElliptecDevice method) frequency_hz (tl_elliptec.devices.base.CurrentCurveSample property) from_reply() (tl_elliptec.devices.base.DeviceInfo class method) (tl_elliptec.devices.base.MotorInfo class method)

G

get_button_status() (tl_elliptec.devices.base.ElliptecDevice method) get_home_offset() (tl_elliptec.devices.base.MotionMixin method) get_home_offset_pulses() (tl_elliptec.devices.base.MotionMixin method) get_info() (tl_elliptec.devices.base.ElliptecDevice method) get_jog_step_size() (tl_elliptec.devices.base.MotionMixin method) get_jog_step_size_pulses() (tl_elliptec.devices.base.MotionMixin method) get_motor_info() (tl_elliptec.devices.base.ElliptecDevice method)

get_position() (tl_elliptec.devices.base.ElliptecDevice method) get_position_pulses() (tl_elliptec.devices.base.ElliptecDevice method) get_position_range() (tl_elliptec.devices.base.ElliptecDevice method) get_status() (tl_elliptec.devices.base.ElliptecDevice method) get_velocity() (tl_elliptec.devices.base.MotionMixin method) get_zero_position_offset() (tl_elliptec.devices.base.ZeroPositionMixin method) get_zero_position_offset_pulses() (tl_elliptec.devices.base.ZeroPositionMixin method) group_address() (tl_elliptec.devices.base.ElliptecDevice method)

H

hardware_release (tl_elliptec.devices.base.DeviceInfo attribute) has_motor2 (tl_elliptec.devices.base.ElliptecDevice attribute) (tl_elliptec.devices.models.ELL6 attribute)

home() (tl_elliptec.devices.base.MotionMixin method) home_pulses() (tl_elliptec.devices.base.MotionMixin method) home_range() (tl_elliptec.devices.base.MotionMixin method)

I

info (tl_elliptec.devices.base.ElliptecDevice property) INITIALIZING_ERROR (tl_elliptec.status.StatusCode attribute) is_imperial (tl_elliptec.devices.base.DeviceInfo attribute)

is_open (tl_elliptec.bus.ElliptecBus property) is_valid_address() (in module tl_elliptec.protocol) isolate_minutes() (tl_elliptec.devices.base.ElliptecDevice method)

L

loop_on (tl_elliptec.devices.base.MotorInfo attribute)

M

MECHANICAL_TIMEOUT (tl_elliptec.status.StatusCode attribute) MODEL_REGISTRY (in module tl_elliptec.devices.models) module tl_elliptec.bus tl_elliptec.devices.base tl_elliptec.devices.models tl_elliptec.exceptions tl_elliptec.factory tl_elliptec.protocol tl_elliptec.status MODULE_ISOLATED (tl_elliptec.status.StatusCode attribute)

MODULE_OUT_OF_ISOLATION (tl_elliptec.status.StatusCode attribute) MotionMixin (class in tl_elliptec.devices.base) MOTOR_ERROR (tl_elliptec.status.StatusCode attribute) motor_on (tl_elliptec.devices.base.MotorInfo attribute) MotorInfo (class in tl_elliptec.devices.base) move_absolute() (tl_elliptec.devices.base.MotionMixin method) move_absolute_pulses() (tl_elliptec.devices.base.MotionMixin method) move_absolute_range() (tl_elliptec.devices.base.MotionMixin method) move_relative() (tl_elliptec.devices.base.MotionMixin method) move_relative_pulses() (tl_elliptec.devices.base.MotionMixin method) move_relative_range() (tl_elliptec.devices.base.MotionMixin method)

O

OK (tl_elliptec.status.StatusCode attribute) optimize_motors() (tl_elliptec.devices.base.OptimizeCleanMixin method)

OptimizeCleanMixin (class in tl_elliptec.devices.base) OUT_OF_RANGE (tl_elliptec.status.StatusCode attribute) OVER_CURRENT_ERROR (tl_elliptec.status.StatusCode attribute)

P

parse_message() (in module tl_elliptec.protocol) period (tl_elliptec.devices.base.CurrentCurveSample attribute) period_for_frequency() (in module tl_elliptec.devices.base) POLL (tl_elliptec.bus.RequestPriority attribute) poll_position() (tl_elliptec.devices.base.ElliptecDevice method) poll_position_pulses() (tl_elliptec.devices.base.ElliptecDevice method) poll_position_range() (tl_elliptec.devices.base.ElliptecDevice method) PULSES_FIELD_IS_PER_REVOLUTION (tl_elliptec.devices.base.ElliptecDevice attribute) (tl_elliptec.devices.models.ELL14 attribute) (tl_elliptec.devices.models.ELL16 attribute) (tl_elliptec.devices.models.ELL18 attribute) (tl_elliptec.devices.models.ELL21 attribute) (tl_elliptec.devices.models.ELL22 attribute)

pulses_per_full_range (tl_elliptec.devices.base.ElliptecDevice property) pulses_per_unit (tl_elliptec.devices.base.DeviceInfo attribute) (tl_elliptec.devices.base.ElliptecDevice property)

R

raise_for_status() (tl_elliptec.bus.Reply method) raw (tl_elliptec.bus.Reply attribute) read_reply() (tl_elliptec.bus.ElliptecBus method) refresh_calibration() (tl_elliptec.devices.base.ElliptecDevice method) refresh_devices() (tl_elliptec.bus.ElliptecBus method)

Reply (class in tl_elliptec.bus) request() (tl_elliptec.bus.ElliptecBus method) request_status() (tl_elliptec.bus.ElliptecBus method) RequestPriority (class in tl_elliptec.bus) reset_factory_default() (tl_elliptec.devices.base.ResetFactoryMixin method) ResetFactoryMixin (class in tl_elliptec.devices.base)

S

save_user_data() (tl_elliptec.devices.base.ElliptecDevice method) scan() (tl_elliptec.bus.ElliptecBus method) scan_current_curve() (tl_elliptec.devices.base.ElliptecDevice method) search_frequency() (tl_elliptec.devices.base.ElliptecDevice method) send() (tl_elliptec.bus.ElliptecBus method) send_urgent() (tl_elliptec.bus.ElliptecBus method) SENSOR_ERROR (tl_elliptec.status.StatusCode attribute) serial_number (tl_elliptec.devices.base.DeviceInfo attribute) (tl_elliptec.devices.base.ElliptecDevice property) set_auto_homing() (tl_elliptec.devices.base.AutoHomingMixin method) set_auto_homing_pulses() (tl_elliptec.devices.base.AutoHomingMixin method) set_backward_frequency() (tl_elliptec.devices.base.ElliptecDevice method) set_backward_period() (tl_elliptec.devices.base.ElliptecDevice method) set_forward_frequency() (tl_elliptec.devices.base.ElliptecDevice method) set_forward_period() (tl_elliptec.devices.base.ElliptecDevice method) set_home_offset() (tl_elliptec.devices.base.MotionMixin method) set_home_offset_pulses() (tl_elliptec.devices.base.MotionMixin method) set_jog_step_size() (tl_elliptec.devices.base.MotionMixin method) set_jog_step_size_pulses() (tl_elliptec.devices.base.MotionMixin method)

set_velocity() (tl_elliptec.devices.base.MotionMixin method) set_zero_position() (tl_elliptec.devices.base.ZeroPositionMixin method) setup_devices() (in module tl_elliptec.factory) skip_frequency_search() (tl_elliptec.devices.base.ElliptecDevice method) status (tl_elliptec.exceptions.ElliptecStatusError attribute) StatusCode (class in tl_elliptec.status) stop() (tl_elliptec.devices.base.MotionMixin method) (tl_elliptec.devices.base.OptimizeCleanMixin method) stream_positions() (tl_elliptec.bus.ElliptecBus method) supports_button_messages (tl_elliptec.devices.base.ElliptecDevice attribute) (tl_elliptec.devices.models.ELL16 attribute) (tl_elliptec.devices.models.ELL21 attribute) (tl_elliptec.devices.models.ELL22 attribute) supports_clean (tl_elliptec.devices.base.OptimizeCleanMixin attribute) (tl_elliptec.devices.models.ELL15 attribute) supports_motor_tuning (tl_elliptec.devices.base.ElliptecDevice attribute) (tl_elliptec.devices.models.ELL16 attribute) (tl_elliptec.devices.models.ELL21 attribute) (tl_elliptec.devices.models.ELL22 attribute)

T

THERMAL_ERROR (tl_elliptec.status.StatusCode attribute) tl_elliptec.bus module tl_elliptec.devices.base module tl_elliptec.devices.models module tl_elliptec.exceptions module

tl_elliptec.factory module tl_elliptec.protocol module tl_elliptec.status module travel (tl_elliptec.devices.base.DeviceInfo attribute)

V

VALUE_OUT_OF_RANGE (tl_elliptec.status.StatusCode attribute)

Y

year (tl_elliptec.devices.base.DeviceInfo attribute)

Z

ZeroPositionMixin (class in tl_elliptec.devices.base)